confessions of a backyard inventor

Category Body Hack

Haptic compass band, revisited

Ever wanted to have a 6th sense?

SleepTrack – Sleep Apnea measuring and prevention machine

UPDATE: 25/2/2014 – Fritzing file is now available for Breadboard, Schematic, and PCB views. Above image is a screen grab of the Breadboard view in Fritzing. This is v1 hardware and will work on all v1.x versions of code (see… Continue Reading →

Coolsculptor/FrankenSculptor – PART 4

This is part 4 of a four part project. Click here for Part 1 Click here for Part 2 Click here for Part 3 This part concentrates solely on the controller and cleaning up the prototype wiring to increase the ease of use… Continue Reading →

Coolsculptor/FrankenSculptor – PART 3

This is part 3 of a four part project. Click here for Part 1 Click here for Part 2 Click here for Part 4 (DISCLAIMER: Use the information below at your own risk. I am not a doctor nor do I know… Continue Reading →

Coolsculptor/FrankenSculptor – PART 2

This is part 2 of a four part project. Click here for Part 1 Click here for Part 3 Click here for Part 4 At this point the device is nearly ready for a test run. Temperature sensors were installed in each plate to… Continue Reading →

Coolsculptor (Cryolipolysis) codename: FrankenSculptor – PART 1 [DIY Coolsculpting machine]

This is part 1 of a four part project. Click here for Part 2 Click here for Part 3 Click here for Part 4 I’ve been working on building my own Coolsculpting device as Zeltiq are offering.It is a machine which reduces… Continue Reading →

© 2023 Make it, Break it, Fix it — Powered by WordPress

Theme by Anders NorenUp ↑